After Zega and Zega Pro, we have now developed the Zega Pro2. Based on the Zega Pro, its excellent properties have all been retained, but many details have also been significantly improved. The Zega Pro2 shines with its improved profile for even better operation, a carrying handle as standard and optimised ventilation.
Above all, though, the pre-assembled version is an absolute revolution! It is factory-fitted with an entirely new attachment system that combines suitability with maximum ease of use, facilitating single-handed use – you could say it's "Plug and play" for fully packed aluminium panniers! There's a single lever on the outside to operate the mechanism. The lid can stay closed when it is removed from the bike. Pannier on, click – and go!
The innovative construction in resilient stainless steel releases the catch before attachment, which means the Zega Pro2 can also cope with extreme loads. The supports for the Zega Pro2 accessories holder are also standard fittings on the pre-assembled Zega Pro2 on both sides of each pannier. They are automatically locked when the lid is closed.
The very strong construction in stainless steel and
fibreglass-reinforced plastic elements provides
absolute stability and reliability even under the toughest conditions. The new fixation system further
reinforces the overall pannier system.
Zega Pro2 panniers will fit on much Touratech pannier racks.
Their special construction offers the
option for balancing out any tolerances.
Available in 3 sizes (31, 38, 45 litres) and 3 finishes natural aluminium, anodised silver "AND-S" and anodised black "AND-black"
The anodised version of the ZEGA Pro2 doesn't just shine in its fabulous natural aluminium look,
but also prevents rubbing inside
the case. The ultra thick, high quality anodised layer offers very
special protection for the surface and helps to prevent discoloration.
The aluminium pannier system again has a very robust construction. We have tried to bring the pannier racks and the panniers as close as possible to the motorcycle. Numerous tests have already been performed in order to ensure that the entire development satisfies the required demands. The rack is made of 18 mm steel tubing and is attached to existing mounting points using special fixing clips and reinforcing pieces. Pillion comfort not restricted in any way.
The pannier systems are also available for Zega Pro.
Whether jungle expedition, desert adventure or driving through the continuous rain of central Europe: our aluminium ZEGA cases have proved their worth in countless motorbike adventures, even under the most extreme conditions, and shown themselves to be indestructible and reliable companions. And now we are delighted to present ZEGA Pro, the revolutionary development that complements our popular touring panniers. Just as versatile as the ZEGA case, beautifully shaped, strong, and with plenty of accessories, it will fit (with the appropriate mounting sets) almost any rack, and is also available in three different sizes and an anodised version
In a modern design and state-of-the-art construction, our developers have come up with a veritable
masterpiece in the ZEGA Pro. Light and yet sturdy, the case is available in a 31, 38 or 45 litre version,
made entirely of 1.5-mm aluminium, water- and dust-proof, and manufactured to the highest standards -
no way were we going to settle for a basic plastic construction that was simply jazzed up with a few bits of
moulded aluminium!
The lid and base of the ZEGA Pro are welded, which achieves the maximum rigidity of the connections,
and the base and outer shell have high quality rivets
(no cheap studs for us - or you!). You'll find no leaky
welded seams along the edges.
The anodised version of the ZEGA Pro doesn't just shine in its fabulous natural aluminium look, but also
prevents rubbing inside the case.
The ultra thick, high quality anodised layer offers very special protection
for the surface and helps to prevent discoloration.
The Zega Pro Topcase offers all of the same advantages as are found with our tried and tested ZEGA Pro panniers! Absolutely waterproof Topcase made from rugged, polished aluminium with protective corners! On the lid are four top loops for attachment the luggage. The anodised version of the ZEGA Pro doesn't just shine in its fabulous natural aluminium look, but also prevents rubbing inside the case. The ultra thick, high quality anodised layer offers very special protection for the surface and helps to prevent discoloration.
Our new accessory holders have been further developed specifically for the
pre-assembled Zega Pro2
aluminium panniers. Innovative solutions and detail improvements figure significantly in the new series.
Zega Pro2 accessory holders attach to the pannier in seconds using the standard attachment points of the
pre-assembled Zega Pro2 aluminium pannier. Securing the pannier lock automatically secures the accessory Holders. This means there is no need for
a push button, and the equipment can remain in the holder.
All Zega Pro2 accessory holders come with plastic elements to protect belts.
Touratech-Thailand Co., Ltd.
126 Moo 6 | Watsriwareenoi - Ladkrabang Road | Srisajorakhaeyai | Bangsaothong | samutprakarn 10540 | THAILAND
Tel. : +66 (0)-2327-9361 to 63
Fax : +66 (0)-2327-9311
E-mail : info@touratech.co.th
