

The renowned clothing manufacturer's vast wealth of experience was just what Herbert Black needed to implement his ideas. The requirements for the Touratech suit were jointly defined. It was vitally important that the suit allowed maximum ventilation for physical exertion at high temperatures. On the other hand, it needed to be completely wind and waterproof in adverse conditions. The rider's passive safety was high up on the list too, of course. Features such as variable widths for the perfect fit, adjustable cuffs and zips etc. could be taken for granted in a joint development like this by two expert partners such as Touratech and Stadler.
If you wanted to sum up the basic concept of the Touratech suit in a nutshell, it would be "3 in 1". In other words, with the Touratech Compañero you get three suits in one.
The centrepiece of the Touratech Compañero is an airy summer suit. Cordura® AFT is used
              on the front and back of the jacket and the legs 
          of the trousers to ensure air flow over a wide
          area. This comfortable synthetic fibre is state-of-the-art in terms of its tear- and wear-resistance
          properties. But still the most vulnerable areas are reinforced with a layer of Cordura 2000 – the
              "2000" indicates a particularly tough yarn thickness. Fully equipped with CE-approved protectors,
              the Touratech Compañero sets the standard. The large reflective panels are a passive safety
              feature, ensuring good visibility.
              If required, the jacket and trousers zip together into an all-in-one.
              Along with these hard facts, the Touratech Compañero also includes countless details that make it
              a comfortable and practical companion on long and short tours alike.
              There are two large outer pockets on the front to hold all the things you need to access quickly on
              the road. There's space for your mobile phone on the upper arm. Valuables can be safely tucked
              away in the spacious inner pockets. A detachable back pocket provides room for the laminate
              jacket.


* We have created a special padding to protect the membrane and reduce the appearance of a wet feeling. This provides good breathability even increasing the damping.
 
                  See-through pocket on the lower arm.
 
                  Upholstered spectacles pocket in the upper arm.
 
                  Various ventilation panels
 
                  Zip for connecting pants
 
                  The trousers can be worn in the boots.
 
                  Zip for connecting jackets
The second layer of the Touratech Compañero can be used in colder weather or in the rain: the
              laminate suit. Perfectly tailored to match the cut 
          of the summer suit, you simply pull it on over
          the top. It's a smart move to empty out your pockets first and place your essential items in the
          pockets
of this overgarment. They are spacious, easily accessible and – of course – waterproof!
          Touratech has cPantsn the Pro Shell three-layer laminate made by W. L. Gore. In this textile
          composite material, the inner lining, the top-quality GORE-TEX® breathable membrane and
          the tough outer layer are bonded into one fabric. This means the laminate is not too bulky,
          doesn't bulge, and always fits nice and snugly. Of course the most important properties of the
          oversuit are that it is wind and waterproof. And since Pro Shell is an active material, the suit is
          fully breathable.
          What's clever with
the Touratech Compañero is that the windproof, waterproof membrane
          forms the outer layer of the clothing system. The airy summer suit keeps an air cushion inside
          that acts as a thermal lining. An additional insulating layer such as fleece underwear is only
          needed in extremely cold weather. 
In wintry conditions the additional storm collar will also be
          greatly appreciated. As you'd expect, the jacket and trousers of the membrane suit can also be
  If you wear the laminate suit in uncertain weather conditions in spring or autumn, ventilation
              panels under the arms and securely closable ventilation zips provide cooling if required. 



And where is the third suit? Right here – the jacket of the membrane suit is not only functional, it's also very chic. As an active jacket, it is easily a match for outdoor clothing brands and is a practical, waterproof and breathable companion for an evening stroll around town or for any excursions where you have to leave your bike behind. Optional accessories: - Storm collar | Hood

 
                  Long pull-on zip: Makes light work of putting
                on the suit!
 
                  Fits over the boot
 
                  Width adjustment on upper arm
 
                  Detachable back pocket
 
                  Large enough to hold the jacket.
 
                  Various Reflective Surfaces
The great success of our
              Compañero motorbike suit has
              encouraged us to launch the
              product in a second colour
              variation. With extra clever
              details and its elegant colour
              scheme, the "Black Edition"
              is an exclusive special
              version of the Touratech
              suit. Black, the primary
              colour, makes a marked
              contrast to the light and
              medium grey areas, turning
              the "Compañero Black
              Edition" into a touring suit for
              everyone who loves something
              special. 
Just like the standard
              model, the "Compañero Black
              Edition" was developed jointly
              with our partner Stadler and is
              available in numerous sizes for
              men and women.

 
                  Long pull-on zip: Makes light work of putting
              on the suit!
 
                  Fits over the boot
 
                  Width adjustment on upper arm
The suit is ideally equipped to fulfil every touring requirement.
Optimal positioning of ventilation openings achieves effective
air circulation. 
100% waterproof with zips closed.
We made no compromises on the materials – the entire suit is made out of Gore 3-layer Pro Shell laminate. We think this should be standard in this price category. The fabric is resilient and highly breathable. Perfect tailoring gives optimal freedom of movement. Innovative, anatomically shaped protectors provide maximum safety. ARMACOR™ reinforcements in vulnerable areas. High-quality fleece inner jacket. Made in Europe for best manufacturing quality. Excellent fit assured since the suit comes in a range of short, standard and long sizes as well as a special women's cut.
 
Reflective 3M Scotchlite™ Material
 
Innovative ventilation system with
waterproof zips
 
Waterproof inner pocket
 
High-quality inner jacket made from
POLARTEC® fleece

The Compañero Boreal is a 3-layer laminate suit. It is an ideal all-year touring suit. The Compañero Boreal jacket is equipped with a high-quality POLARTEC ® fleece inner jacket. This windproof inner jacket unzips from the outer jacket so you can wear it for a stroll around town or on the beach. The Compañero Boreal suit was developed in close collaboration with renowned motorcycle clothing manufacturer Stadler.
A new feature in this concept is the use of waterproof YKK zips on the jacket and trouser vent openings. Intensive testing was carried out to find the optimum zip positioning. On the jacket, this innovative ventilation system comprises two zips on the front and two vent zips on the back. Four zips are also incorporated into the trousers for optimal ventilation. As a result, the suit always provides exceptional body climate control.
The jackets and trousers of different Compañero suit models can be combined as they use the same connecting zips.
 
Waterproof outer pockets | 
  Continuously adjustable waist
 
Large back pocket
 
Splash-proof cargo pockets on 
  both thighs | Ventilation system
 
Moisture barrier on leg hem
1) The test procedure for certification according to EN 1621-1:2012 is currently in progress. The average transmitted force and peak values established for certification according to EN 1621- 1:1997 and EN 1621-1:2003 satisfy the criteria for level 2 in EN 1621-1:2012. The protectors are ergonomically optimised, e.g. asymmetrical shoulder shape protects the shoulder blade and collarbone joint.







High-quality inner jacket made from POLARTEC®
fleece. Polartec® Wind Pro® fleece is extremely
breathable and four times more wind-resistant than
a conventional fleece. Polartec® Wind Pro® fleece
is extremely resilient and durable. The outside of the
material is water-repellent. The lofted surface inside
traps air to keep you feeling warm. Polartec® Wind
Pro® fleece maintains 85%
 of the breathability of a
traditional fleece to prevent you from overheating.

Rainproof from head to toe
Material: GORE-TEX® Pro Shell 
3-layers,
skin-friendly Mikrofaser
Coleur: Black

Rainproof from head to toe
  
  The storm collar system is made from Gore-Tex®
3-layer laminate. 
The inside is lined with skinfriendly
microfibre. Snap fasteners attach the storm
collar to your jacket's neck. The storm collar and
your jacket collar can both be done up at the same
time.
Material: GORE-TEX® Pro Shell
3-layers, skinfriendly
Mikrofaser
Coleur: Black

Elastic braces with synthetic leather and snap fasteners.
501-3321 size 1           1,860 ฿ 
  501-3322 size 2           1,860 ฿ 
  501-3323 size 3           1,860 ฿ 
  501-3324 size 4           1,860 ฿ 


The crotch strap can be used to prevent a "lifting
up" of the jacket during a fast ride. 
The strap will be
routed through the legs and fixed in front and back
with velcro-loops.
One size 501-3310 1,240 ฿
7 500-1130            10 500-1133
  8 500-1131           11 500-1134
  9 500-1132           12 500-1132           4,620 ฿ 


Outside waterproof gloves with abrasion resistant
material on the palm,
to be worn over motorcycle
gloves.
S 500-0240          XL 500-0243
M 500-0241         XXL 500-0244
L 500-0242          3XL 500-0245           1,160 ฿ 
Following the tremendous success of our "Companero" (070-0180) hydration pack, we have gone another
step further. We have collaborated with the rucksack specialist DEUTER to develop a rucksack that
meets almost every requirement an adventure traveller could have! On a motorbike, bicycle or hiking
- it even looks good in the city! There's plenty of space in the "Touratech Adventure" for everything you
could possibly need when you're on the go. All divided into various compartments - but with no loss of
clarity. The special shape, innovative interior and first-class Deuter Airstripes carrying system guarantee
the perfect fit in any situation.
The rucksack for bikers!
Colour: black/grey/yellow - Capacity: approx. 30 litres
Material: Hextop 210d Nylon (yellow), Super-Polytex 600d Polyester (black/grey)
055-0194 5,780 ฿


Once again we put all our experience in a big pot, turned up the heat, 
  and gave it a good stir.
The result? We've created the Touratech Companero hydration system – the superlative hydration pack!

Touratech-Thailand Co., Ltd.
126 Moo 6 | Watsriwareenoi - Ladkrabang Road | Srisajorak
          haeyai | Bangsaothong |  samutprakarn 10540 | THAILAND
Tel. : +66 (0)-2327-9361 to 63
        Fax : +66 (0)-2327-9311
        E-mail : info@touratech.co.th


